EDIFIER TWS6 - True Wireless Earbuds Headphones Manual

Product Description and Accessories

There are different size of ear tips attached in the package, please select the suitable ones to wear.

Note: Images are for illustrative purposes only and may differ from the actual product.

Wearing Instructions

How to wear earwings

Keep earbud and earwing in the same direction

Put the earwing over the earbud

Put the ear tip over the earbud

How to wear memory foam ear tips

Pinch memory foam ear tip and put it over the earbud

Fix the earbud by hand and release until the memory foam ear tip rebounds

User Guide

Charge the Earbuds

• You may hear a warning tone when at low battery level, please charge the earbuds.
• Charging: place the earbuds in the charging case
  Charging time: about 1.5 hours for a full charging
  LED light flashing in a breathe pattern=charging
  LED light off=fully charged

Charge the Charging Case

Every time when the charging case is opened, the flashing times of indicator light on its bottom mean the times that the earbuds can be charged; if the indicator light flashes rapidly, it means the charging case has a low battery capacity, please charge the case in time.

LED light flashing = charging

Wired charging
Rated input: 5V 55mA(earbuds)

LED light off = fully charged

Wireless charging
5V 500mA(charging case)

The rechargeable batteries that provide power for this product must be disposed properly for recycling. Do not dispose of batteries in fire to prevent an explosion.
If the product with lithium battery is not used for long periods of time, please charge the product at least once per three months.

Power ON/OFF

• Power on automatically when taken out from the charging case;
• Power off automatically while placed in the charging case.

Bluetooth Connection

• Open the charging case, then press and hold the pairing button to enter pairing state, the LED light flashes rapidly;
• Set mobile phone to search for and connect to either "EDIFIER TWS6 L" or "EDIFIER TWS6 R", after pairing is successful, the LED light flashes slowly.
• You can choose to use one earbud or both earbuds.

TWS Pairing of the Left and Right Earbuds

The left and right earbuds have finished TWS pairing before leaving factory. If the wireless connection fails to resume, please follow the steps below to re-pair:

• Place the earbuds in the charging case, then press and hold the pairing button for 8 seconds to enter TWS pairing state, the LED light flashes rapidly;
• After pairing is done, blue lights of both earbuds flash slowly.

Functional Operation Instructions

Music Playback

Voice assistant: double click the left earbud
Pause/play: double click the right earbud

Call (same operation for the left and right earbuds)

Accept a call: double click
End a call: double click

• Clear pairing records: Whether the charging case is being charged or not, open the case and place the earbuds in it, then press and hold the pairing button for approx. 10 seconds to clear pairing records.

FAQs

LED light is off during charging.

• Please ensure the earbuds are correctly placed in the charging case.
• When the earbuds have not been used for long periods of time, the battery will enter sleep state, it needs to charge about 30 minutes and then the light will be lit.

No sound

• Check if the earbuds are operating.
• Check if the earbuds volume are at an appropriate level.
• Check if the earbuds are correctly connected with mobile phone.
• Check if the earbuds are operating within a normal working range.

The call quality of the earbuds are not good.

• Check if mobile phone is in an area with strong signal.
• Please ensure the earbuds are within effective distance (10m) and no obstacle between the earbuds and mobile phone.

When playing music, cannot control pause/play via the earbuds.

• Please ensure the paired device support AVRCP (Audio Video Remote Control Profile) profile.

Maintenance

• Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
• Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and make plastic components deformed.
• Do not put the product in cold places to avoid damaging internal circuit board.
• Do not dismantle the product. Non-professional personnel may damage the product.
• Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
• Do not use drastic chemicals or cleaner to clean the product.
• Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download EDIFIER TWS6 - True Wireless Earbuds Headphones Manual