Acnodes PC 8717 User Manual page 82

Step 3. Touch each screen as it displays Please touch this monitor. Press 'S' to skip
Following this sequence and touching each screen is called mapping the touch screens.
Step 4. After the setting procedure is finished, maybe you need to calibrate for each panel and
controller.
NOTES:
1. If you used a single VGA output for multiple monitors, please do not use the Multiple
Monitors function. Just follow the regular procedure for calibration on each of your desktop
monitors.
2. The Rotating function is disabled if you use the Multiple Monitors function.
3. If you change the resolution of display or screen address, you have to redo Map Touch
Screens so the system understands where the displays are.
4. If you more monitor mapping one touch screen, Please press 'S' to skip mapping step.
Tools
Draw
Advanced Calibration Enable Advanced Calibration function
Right Button Icon
Tests or demonstrates the PenMount touch
screen operation.
Enable right button function. The icon can
show on Desktop or System Tray (menu bar).