Table of Contents
Advertisement
Close 1-2
Close 3-4
Close 5-6
27. COM6
:
(2.0mm Pitch 2x5 Pin Header), COM6 Port, standard RS232 ports are provided. They can be used
directly via COM cable connection. COM6 port is controlled by pins
Signal 5V or 12v, For details, please refer to description of JP3.
Signal Name
JP3select Setting
(RI/5V/12V)
28. USB_LAN1/USB_LAN2
USB4/USB5/USB6/USB7：(Double stack USB type A), Rear USB connector, it provides up to 4
USB2.0 ports, speed up to 480Mb/s.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors into different
Receptacle.
LAN1/LAN2: (RJ45 Connector), Rear LAN port, Two standard 10/100/1000M RJ-45 Ethernet ports
are provided. Used Realtek RTL8111D chipset, LINK LED (green) and ACTIVE LED (yellow)
respectively located at the left-hand and right-hand side of the Ethernet port indicate the activity and
transmission state of LAN.
COM6 RI (Ring Indicator) (default)
COM6 Pin9=+5V
COM6 Pin9=+12V
Pin#
DCD
1
TXD
3
Ground
5
RTS
7
9
:
(option)
(option)
Pin#
Signal Name
2
RXD
4
DTR
6
DSR
8
CTS
10
NC
No.1~3
of JP3,select output
Advertisement
Table of Contents
