Subscribe to Our Youtube Channel
Related Manuals for Proluxe TWD2540
Summary of Contents for Proluxe TWD2540
- Page 1 Operations Manual Edge Plus - 25”x40” Tortilla Warmer Grill Model #: TWD2540 WWW.PROLUXE.COM Version: 51719...
- Page 2 Safety Summary Controller Operation WARNING Ternperature Control In case of power cord damage Press the MODE button until do not attempt to repair or temperature is displayed. replace the power card Contact the manufacturer or the local 2 . Push and Hold SET button and distributor .
- Page 3 CLEANING Use only cleaners which are safe for ALUMINUM. DO NOT use caustic cleaners, ice or cold water to clean the grill. Turn grill down or OFF during idle periods to prevent carbon buildup. 1. Turn power off and unplug, allow grill to cool. 2.
- Page 4 20281 Harvill Ave Perris, CA 92570 Tel: (800) 624-6717 Fax: (951) 657-4594 TW2023&TW2540 Recommended Cleaning Procedures DO NOT use ice or cold water to cool unit down. This causes the platens to warp. TOOLS REQUIRED: 1. Spatula w/ rounded corners 2. Damp Washcloth 3. Griddle cleaner 1.
- Page 5 TWD2540E EXPTWD2540E NC 110819 CUSTOMER MANUAL...
- Page 6 PARTS LIST FOR MODEL TWD2540E ITEM DESCRIPTION PART NUMBER QTY. SHROUD, TWD2540E TP23481 INSULATION, FIBERGLASS 15 X 40 110108815 INSULATION, FIBERGLASS 10 X 40 110108810 SCREW, PHILLIPS PAN HEAD 10-24 X 1/4 STAINLESS STEEL SP102414S BURN GUARD ASSEMBLY TP23490 WASHER SPLIT LOCK 3/8 WL38 SCREW, BUTTON HEAD 3/8-16 X 1/2 STAINLESS STEEL SB381612S LEG, APPLIANCE, 4"...
- Page 7 The heating elements on the upper and lower platen only; will be replaced by next day air service; under the normal one year warranty. Such repair or replacement will be at the expense of Proluxe on under the normal one year warranty.
- Page 8 Exclusions: 1. WOOD / GAS FIRED OVENS: PROLUXE warranty applies to the main body of the oven being steel / refractory and insulation shall be free from defects in materials and workmanship for a period of four years from the date of purchase. The gas equipment shall be free from defects in materials and workmanship for a period of one (1) year from the date of purchase.
Need help?
Do you have a question about the TWD2540 and is the answer not in the manual?
Questions and answers