Models: XL1, XL160, XL161, XL162, XL163, and XL165
Before You Begin
Removal Sequence
Product Description
(Illustration not shown but is
forthcoming.)
Maintenance & Service Guide
Presario 1900 Series
Specifications
Troubleshooting
Pin Assignments
Battery Operations
Removing the System
Board (Continued)
13. Remove the right hinge bracket before
removing the DC IN board.
14. Disconnect cable from DC IN board.
15. Lift the RJ11 connector off the guide
posts
located on the right side on the
chassis.
Return to Removal and Replacement
Procedures.
Parts Catalog
Index