Table of Contents
Advertisement
Before You Begin
Removal Sequence
Product Description
Removal and Replacement Procedures
Cables and Connectors
Most cables used throughout the unit are ribbon cables. Cables must be handled with
extreme care to prevent damage. Apply only the tension required to seat or unseat the
cables during insertion or removal from the connector. Handle cables by the connector
whenever possible. In all cases, avoid bending, twisting, or tearing the cables, and
ensure that the cables are routed in such a way that they cannot be caught or snagged
by parts being removed or replaced.
Cables
Use the following precautions when handling cables to avoid damage to the cable or
computer:
Always handle cables by their connectors.
Avoid bending, twisting, or pulling on the cables.
Apply minimum required force when seating or unseating the cables from their
connectors.
Place the cables in such a manner that they cannot be caught or snagged by parts being
removed or replaced.
Handle flex cables with extreme care; they can tear easily.
CAUTION: When serving these computers, ensure that cables are placed in
their proper location during the reassembly process. Improper cable placement
can cause severe damage to the unit.
Select the desired illustration
Removing a cable from a
The cable position for the
Plastic Parts
Plastic parts can be damaged by the use of excessive force during disassembly and
reassembly. When handling the plastic parts, use care. Apply pressure only at the
points designated in the maintenance instructions.
Return to Removal & Replacement Procedures .
Maintenance & Service Guide
Presario 1900 Series
Models: XL1, XL160, XL161, XL162, XL163, and XL165
Troubleshooting
Pin Assignments
ZIF Connector
Speaker Assembly.
Specifications
.
Parts Catalog
Battery Operations
Index
Advertisement
Table of Contents
