Table of Contents
Advertisement
Models: XL1, XL160, XL161, XL162, XL163, and XL165
Before You Begin
Removal Sequence
Product Description
Removal and Replcement Procedures
Service Considerations
Listed below are some of the considerations that you should keep in mind
during the disassembly and assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following items:
5 millimeter nut drivers (for screwlocks and standoffs)
Small, Phillips (P-Zero) screwdriver
Small, standard screwdriver
Small, pair of tweezers
Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect
screw is used during the reassembly process, it can damage the unit. Compaq
strongly recommends that all screws removed during disassembly be kept
with the part that was removed, then returned to their proper locations.
As each subassembly is removed from the computer, it should be
IMPORTANT:
placed away from the work area to prevent damage.
Return to Removal & Replacement Procedures.
Maintenance & Service Guide
Presario 1900 Series
Specifications
Troubleshooting
Pin Assignments
Parts Catalog
Battery Operations
Index
Advertisement
Table of Contents
