Charging the Battery
Go to BISSELL.ca/support for additional how-to videos.
Before first use, make sure to fully charge your stick vacuum for 4 hours to get a full charge.
To charge the battery you can plug the charger directly into the Hand Vacuum Assembly or into the
Wall Storage & Charging Station.
Charging with the Hand Vacuum
1.
2.
Plug the battery charger
Plug the charger into the
into the wall.
charging port on the back side
of the hand vacuum.
Charging with the Wall Storage & Charging Station
1.
2.
Follow instructions on
Let the vacuum charge for 4
page 5 for installing the Wall
hours or until all three sections
Storage & Charging Station.
of the battery charge icon are
Once installed, hang the
illuminated.
machine onto the station.
6 BISSELL.ca
4
3.
Let the hand vacuum charge
for 4 hours or until all three
sections of the battery charge
icon are illuminated.
4