Chapter 1 - Overview - Garnet SeeLEvel II 709-RVC NLP Manual

Rv tank monitor
Hide thumbs Also See for SeeLEvel II 709-RVC NLP:
Table of Contents

Advertisement

CHAPTER 1 - OVERVIEW

T
he S
forward in level measurement technology for the Recreational
Vehicle industry. The SeeLeveL has a combination of features,
accuracy, reliability, and diagnostic capability that have never
been available before.
Model 709-RVC NLP will monitor the battery voltage and the fresh
water and sewer holding tanks. The 709-RVC NLP is also RV-C
network compatible, the tank levels and alarms are available on
the RV-C bus for the fresh, grey and black tanks. The information
is displayed on a 3-digit alpha-numeric LED display. There is
one alarm output available which can be used to signal a high or
low water or sewer level as required. In addition, the system can
display the operating characteristics of each of the tank sending
units, giving it unsurpassed diagnostic capability.
WARNING: All power circuits must be fused. If a fuse is not
W
provided with the system then it is the installer's responsibility to
install a fuse with a maximum rating of 7.5 amps.
For more detailed information please refer to Chapter 7
"TROUBLESHOOTING GUIDE" and section "How to avoid
damaging the display or pump switch due to excessive current".
709-RVC NLP Manual
TM
L
L II
EE
EVE
Tank Monitor represents a massive leap
Page 3

Advertisement

Table of Contents
loading

Table of Contents