Troubleshooting - Vissani 30SSC19PRT Use And Care Manual

Troubleshooting

Problem
□ The power line and the cable locking connector is
After
not connecting properly.
installation, the
unit doesn't
□ The wires from the switches are disconnected or
work.
loose.
□ The motor is defective, possible seized.
Light works,
□ The thermally protected system detects if the motor
but motor is not
is too hot to operate and shuts the motor down.
turning.
□ The motor wire is not connected.
□ The motor is not secure in place.
The unit is
□ Damaged blower wheel.
vibrating.
□ The hood is not secured in place.
□ Defective lightbulb.
The motor is
□ The lightbulb is loose.
working, but the
lights are not.
□ The wires on the light switch are loose.
Possible Causes
□ Check the power connection with the unit is connected
properly.
□ Make sure the wires on the switches are connected
properly.
□ Change the motor.
□ The motor will function properly after the thermally
protected system cool down.
□ Make sure the motor wire is plugged into the molex con-
nector.
□ Tighten the motor in place.
□ Change the blower.
□ Check the installation of the hood.
□ Change the lightbulb.
□ Tighten the lightbulb.
□ Make sure the wires on light switch are connected
properly.
16
Solutions