Page 2
WARNING 1. Must use ground nails, ropes, and expansions screws for whichever ground you install on for stability to avoid devastat- ing injuries for people inside or nearby and property damage caused by a collapsing gazebo. 2. Do not use this gazebo in high winds, heavy snow, or inclem- ent weather.
Page 3
ASSEMBLY INSTRUCTIONS 1. Two or more people are required for assembly. 2. A ladder and electric drill may be necessary. 3. Do not erect the structure in heavy winds or inclement weather. 4. Do not leave up this unit for extended periods of time, as it is not a permanent structure or designed to withstand sustained wind or rain.
Page 10
ASSEMBLY INSTRUCTIONS 2pcs 2pcs 2pcs 8pcs When connecting B and B1 via P, make sure that 3 holes on part P (as shown in the picture) should be facing upwards. Do not install it upside down.
Page 13
ASSEMBLY INSTRUCTIONS 2pcs 2pcs 2pcs 4pcs 16pcs When connecting B1 and B2 via P, B2 and B via P, make sure that 3 holes on part P (as shown in the picture) should be facing upwards. Do not install it upside down.
Page 19
ASSEMBLY INSTRUCTIONS 152pcs When sliding 8 x hook U onto each rail of parts B &B1&B2, they should face inward. The same for sliding 7 x hook U on rails of parts B and B1. X7 X7...
Page 37
ASSEMBLY INSTRUCTIONS 160pcs 100pcs 4pcs 8pcs 48pcs Notes: 1. When installing the ceiling , fix the screws on the central beam first to prevent the iron sheet from falling and causing injury. 2. Do not fully secure the screw until all screws are properly in position.
Page 38
ASSEMBLY INSTRUCTIONS 4+2pcs The other part has 8 holes One part of the hanging on curtain has 7 holes Part B. hanging on Part B1. The other part has8holes hanging on Part B2. One part of the curtain has 7 holes The other part hanging on Part B.
Page 39
ASSEMBLY INSTRUCTIONS Pay attention to the sidewall curtain's installation position.
Page 40
ASSEMBLY INSTRUCTIONS 4+2pcs The other part has 8 holes One part of the hanging on netting has 7 holes Part B. hanging on Part B1. The other part has 8 holes hanging on Part B2. One part of the netting has 7 holes The other part hanging on Part B.
Page 41
ASSEMBLY INSTRUCTIONS Note: Attach 1 to 2 to secure parts T1 and T (curtains) together. Attach 1 to 3 to secure the back curtain (T). Attach 1 to 3 to secure the front netting (T1). Pay attention to the sidewall Hang the hook attached to netting's installation position.
Page 42
ASSEMBLY INSTRUCTIONS 18pcs 18pcs To improve wind resistance, be sure to complete this installation step. If expansion screws or ground nails are not installed,strong winds Cement surfaces may topple the gazebo. Expansion screws are essential for stability on cement surfaces, and ground nails are for grassy surfaces.
Page 44
Pure & Easy CONTACT US: If you have any questions about the installation of YITAHOME products, just contact us at +� (���) ���-���� from Mon-Fri �:�� AM-�:�� PM PST / Sat. �:�� AM-��:�� PM PST or e-mail us at after-sale.cs@hotmail.com Alternative method to contact us (amazon.com orders only)
Need help?
Do you have a question about the LHHY-V 2 and is the answer not in the manual?
Questions and answers