Table of Contents
Advertisement
CME855A & CME1000A
SPECIFICATIONS
Always refer to the nameplate, located on the back
of the cabinet, for the:
model number,
serial number,
basic electrical
requirements,
minimum circuit ampacity,
maximum fuse size,
and refrigerant charge.
A serial number plate with the model number,
serial number and refrigerant charge is located
behind the front panel, near the control box.
The unit comes from the factory with the correct
refrigerant charge. The refrigerant charge
information is for recharging, should that be
necessary.
All utility connections are made at the back of the
ice maker.
Before beginning installation, be sure that all of the
components necessary for complete assembly of
the ice system are available, and are the correct
components with regard to model, voltage, and
finish.
The CME855 or CME1000 will fit Scotsman bin
BH800 without needing a bin top. Other bins will
require a bin top.
Model Number
Dimensions
W" x D" x H"
CME855AE-32A
42 x 24 x 27
CME855AE-6A
42 x 24 x 27
CME1000AE-32A
42 x 24 x 27
CME1000AE-3A
42 x 24 x 27
CME1000AE-6A
42 x 24 x 27
* The system charge is in the machine. This number is for recharging purposes only. If the nameplate has a
different value, go by the nameplate. ** Or HACR type circuit breakers.
Minimum
Maximum
Basic Electrical Refrigerant
208-230/60/1
230/50/1
208-230/60/1
208-230/60/3
230/50/1
Air Temperature
0
50
F.
0
100
F.
December, 1994
Air Out
Min.
Type
Circ.
Amps
R-404A
15.9
R-404A
R-404A
19.9
R-404A
13.8
R-404A
Water Temperature
0
40
F.
0
100
F.
Page 2
Serial Number
Plate Behind
Front Panel
Air In
Max.
Refrigerant
Fuse** Size
Charge*
20
36 ounces
36 ounces
20
42 ounces
15
42 ounces
42 ounces
Voltage
-5%
+10%
Advertisement
Table of Contents
