Table of Contents
Advertisement
CME855A & CME1000A
FOR THE INSTALLER: Final Check List
1. Is the ice maker cabinet in a room where
ambient temperatures are within the minimum and
maximum temperatures specified?
2. Is there clearance at the left side of the cabinet
and at the back and top for service and utility
connections?
3. Has water supply pressure been checked to
insure a minimum of 20 PSIG and a maximum of
80 PSIG operating pressure?
4. Is the cabinet level?
5. Check that any shipping material has been
removed from inside the cabinet.
6. Have all electrical and piping connections been
made?
7. Are the Master and
Compressor switches on OFF?
Final Check List
8. Has power been connected
to the ice maker?
Power?
9. Is the water supply line shut
off valve installed?
10. Check all refrigerant lines
and conduit lines, to guard
against vibration or rubbing
and possible failure.
11. Have the bin and cabinet
been wiped clean and
sanitized?
Cabinet
12. Has the Customer
Secure?
Evaluation and Warranty
Registration form been properly
filled out? Check for correct
model and serial numbers from
Serial nameplate, then mail the
completed form to SCOTSMAN.
13. Has the owner been given
the name and telephone
number of the authorized
Water
Supply?
SCOTSMAN Service Agency
serving him?
Filter?
Reservoir
Bin Drain?
Drain?
October, 1994
Page 9
Advertisement
Table of Contents
