Accessory Parts And Parts To Be Procured Locally - Toshiba MMD-AP0181H Instruction Manual

Accessory parts and Parts to be procured locally

H Accessory parts
Part name
Installation Manual
Heat insulator
<Separate sold parts>
Part name
Standard wired remote controller
Refrigerant piping
• Piping material used for the conventional refrigerant cannot be used.
• Use copper pipe with 0.8 mm or more thickness for Ø6.4, Ø9.5, Ø12.7.
Use copper pipe with 1.0 mm or more thickness for Ø15.9.
• Flare nut and flare works are also different from those of the conventional refrigerant. Take out the flare nut
attached to the indoor unit of the air conditioner, and use it.
H Parts to be procured locally
Connecting pipe (Liquid side)
(6.4mm (diam.), Nominal (diam.) 1/4" thick 0.8mm)
MMD-AP0181H
(9.5mm (diam.), Nominal (diam.) 3/8" thick 0.8mm)
MMD-AP0241H to MMD-AP0481H
Connecting pipe (Gas side)
(12.7mm (diam.), Nominal (diam.) 1/2" thick 0.8mm)
MMD-AP0181H
(15.9mm (diam.), Nominal (diam.) 5/8" thick 1.0mm)
MMD-AP0241H to MMD-AP0481H
Power supply cord
2
Cable 3-core 2.5mm , in conformity with
Design 60245 IEC57
Q'ty Shape
1 This manual
1
1
Q'ty Shape
1
Installation of remote controller
(Sold separately)
For installation of the wired remote controller, follow the
Installation Manual attached with the remote controller.
• Do not put the remote controller on the place where is
exposed to direct sunlight or near a stove, etc.
1
Usage
(Be sure to hand over to customers)
For heat insulation of Gas pipe connecting section
For heat insulation of Liquid pipe connecting section
Usage
Model: RBC-AMT21E