Mitsubishi Electric GUG-02SL-E Operating Instructions Manual page 58

4
Manual vane angle
Select:
Outlet
F1
Manual vane angle
Angle
F2 F3 F4
Setting
The current vane setting will appear.
Select the desired outlets from 1 through 4 with
the F1 or F2 button.
Outlet: "1," "2," "3," "4," and "1, 2, 3, 4, (all outlets)"
•
Press the F3 or F4 button to go through the
option in the order of "No setting (reset)," "Step
1," "Step 2," "Step 3," "Step 4," and "Step 5."
Select the desired setting.
■ Vane setting
No setting
Step 3
All outlets
Press the SELECT button to save the settings.
A screen will appear that indicates the setting
information is being transmitted.
The setting changes will be made to the selected
outlet.
The screen will automatically return to the one
shown above (step 4) when the transmission is
completed.
Make the settings for other outlets, following the
same procedures.
If all outlets are selected,
displayed the next time the unit goes
into operation.
Navigating through the screens
• To go back to the Main menu .......... MENU button
• To return to the previous screen ...... RETURN button
Step 1 Step 2
Step 4 Step 5
will be
45