Mitsubishi Electric GUG-02SL-E Operating Instructions Manual page 28

Preset temperature
<Cool, Dry, Heat, and Auto (single set point)>
Cool
Mode
F1
<Auto (dual set point) mode>
1
Preset
temperature
for cooling
Auto
Preset
temperature
Mode
for heating
F1
Fri
Room
Set temp. Auto
Temp. Fan
F2 F3 F4
Fri
26
Room
28
Auto
2
Temp. Fan
F2 F3 F4
Press the F2 button to decrease the preset
temperature, and press the F3 button to
increase.
•Refer to the table on page 13 for the settable
temperature range for different operation modes.
•Preset temperature range cannot be set for Fan/
Ventilation operation.
•Preset temperature will be displayed either in
Centigrade in 0.5- or 1-degree increments, or in
Fahrenheit, depending on the indoor unit model and the
display mode setting on the remote controller.
Room
Cool
Mode
Example display
(Centigrade in 0.5-degree increments)
The current preset temperatures will appear.
Press the F2 or F3 button to display the
Settings screen.
Fri
28.5
Set temp. Auto
28.5
Temp. Fan
15