Auto Mode; Force Cooling Function; Sleep Mode - Midea MSV1-07CR-QB8F Service Manual

9.10 Auto mode

9.10.1 The air conditioner automatically selects one of the following operation modes: cooling, heating or
fan only according to the temperature difference between room temperature (TA) and set temperature
(TS).
9.10.2 The indoor fan blows automatically in corresponding selected mode；
9.10.3 The motion of indoor fan's blade should accord with the selected operation mode；
9.10.4 One mode should be carried out for at least 15 minutes once selected. If the compressor cannot
start for 15 minutes, reselect the operation mode according to the room temp. and set temp., or reselect
when the set temp. varies

9.11 Force cooling function

9.11.1 Select forced cooling function with the forced cooling button or the switch
9.11.2 The compressor is unconditionally turned on, after 30 minutes cooling operation whose fan mode
is set as low, the A/C operates at the DRY mode with a set temp. of 24℃
9.11.3 All protections of remote control cooling are available at forced cooling operation
9.11.4 Forced Auto function
Select forced auto function with the forced auto button or the switch.
In forced auto status the A/C operates at remote control mode with a set temp. of 24℃.
Manual operation is controlled by touching buttons and divided into force cooling and forced auto
mode.
It transfer between these two modes by pressing the buttons, the cycling order of the button press is as
below graph show to you.

9.12 Sleep mode

9.12.1 The sleep function is available at cooling, heating or auto mode
9.12.2 Cooling:
Service manual
- 28 -