AEG DVD 4534 Instruction Manual page 56

English
56
Video setup
Speaker setup
05-DVD 4534 N AEG_GB.indd 56 05-DVD 4534 N AEG_GB.indd 56
Here you can make various settings to adapt the video signal.
All settings can be made with a slide control.
Brightness
Contrast
Hue
Saturation
Sharpness
Downmix
Change the characteristics of the speaker output:
LT/RT: Choose this setting if you want to play the DVD with the Pro Logic
Dolby stereo eff ect. This produces a almost real 2-channel replay eff ect.
Stereo: Choose this setting if you want to play a DVD, that has been
produced in the 5.1-Audio format, as 2-channel stereo sound.
VSS: You may probably not have a 5.1-Audio system. In this case you
can use the „VSS"-setting to simulate a similar sound eff ect.
5.1 CH: Select this setting to transmit the Audio signal to the output
device without changes.
NOTE:
The „SUBWOOFER", „CENTER", „CENTER DELAY", „REAR" and „REAR
DELAY" menus only appear if the „5.1CH" option is enabled on the
„DOWNMIX" menu.
Subwoofer, Center, Rear
Here you can set the characteristics of the loudspeakers.
ON: The loudspeaker emits audio signals.
Large: The loudspeaker produces bass and treble sounds.
Small: The loudspeaker produces only treble sounds.
Off : The loudspeaker does not produce any audio signals.
Center/Rear Delay (CENTER DELAY/REAR DELAY)
If you use a 5.1-Audio system, you may experience a distortion of the
sound impression caused by the distance diff erences between speaker
groups and listener. Sounds that should be heard by the listener at the
same time arrive successively.
Here you can delay the output from the center or rear loudspeakers in
order to ensure that the listener hears balanced sound.
16.06.2009 9:47:33 Uhr 16.06.2009 9:47:33 Uhr