Download Print this page

AEG DVD 4534 Instruction Manual page 55

Advertisement

Available languages

Available languages

Language setup
Audio setup
05-DVD 4534 N AEG_GB.indd 55
05-DVD 4534 N AEG_GB.indd 55
Rating (Child protection)
Some DVD contain information concerning the target group. This
method is comparable with the rating of cinema fi lms („Suitable only for
persons of 12 years and over" e.g.).
If you have the child protection option activated a probably existing
corresponding information is read from the DVD and compared with the
value pre-set by you. If a DVD is intended for an older age group than
the one pre-set by you, the DVD cannot be played.
The following child protection options are available:
KID SAF: Suitable for children.
G: Suitable for all age groups.
PG: The presence of parents is recommended. Some scenes may be
unsuitable for children.
PG 13: The presence of parents is strictly recommended. Some
scenes may be unsuitable for children under the age of 13.
PGR: The presence of parents is strictly necessary.
R: Young persons under the age of 17 may only view this fi lm in the
presence of an adult.
NC17: Children and juveniles under the age of 17 are not allowed to
watch this fi lm.
ADULT: The fi lm must only be watched by adults.
Default settings
Select the command „Default/Restore" if you want to reset the player to
the factory implemented default settings.
Any settings you have made will be lost.
Here you can make various language settings.
OSD language: The language in the on-screen displays.
Audio language: The language of the Audio output.
Subtitle language: The language of fi lm related subtitles.
Menu language: The language of the DVD-menus.
Audio output
Here you specify the settings for the digital Audio output.
OFF: Output of an analogue Audio signal, but no digital signal.
RAW: Output of a digital Audio signal. Use this setting if your ampli-
fi er is notwo-channel stereo amplifi er.
PCM: Output of a digital Audio signal that is converted to a 2-chan-
nel signal. Use this setting if your amplifi er is a two-channel stereo
amplifi er.
NOTE:
If there is no Audio output, even though you connected the DVD-
Player to an amplifi er, you will most likely have chosen an incorrect
setting for the Audio output.
English
55
16.06.2009 9:47:33 Uhr
16.06.2009 9:47:33 Uhr

Advertisement

Chapters

loading

This manual is also suitable for:

Dvd 4534 n