AEG DVD 4542 Instruction Manual page 38

English
38
Connecting the Audio cable
Fig. 2/13
Fig. 2/12
Inputs on the Front
Fig. 1/9
Switching on the player
Fig. 1/9
05-DVD 4542_AEG_GB.indd 38
You can choose from two transmission methods for audio signals.
You must generally choose first whether you would like to have the
sound coming from your TV, or through a Stereo-Amplifier. The Audio
cable must then be connected to the TV or an amplifier accordingly.

NOTE:
If your amplifier is equipped with a digital output, you should use the
amplifier. You will experience a much better audio quality, and the
installation is much easier.
Stereo
Connect both Audio cables for the right and the left speakers to your
playback device or your amplifier.
1. Plug the Audio jacks into the sockets on the back of the player.
2. Plug the Audio jacks into the corresponding sockets on your play-
back device or your amplifier.
Digital
Connect the Coaxial cable for transmission of digital Audio signals to
your playback device or your amplifier.
1. Plug the Audio jack into the socket on the back of the player.
2. Plug the Audio jack into the corresponding socket on your playback
device or your amplifier.
USB Input (on the Front)
Connect your output device directly to the socket on the front of the
device.
Turn on the main switch of the DVD player by pressing the „POWER" on/
off switch on the front of the machine.
14.10.2009 15:09:50 Uhr