Advertisement
g
If the
"Clean" indicator (Figure 2/L)
illuminates, you should run the clean-
ing program as described below. Clean-
ing can also be carried out as described
below before the indicator illuminates.
You can continue to use your appliance
and run the cleaning program later.
However, in this way you will endan-
ger your rights to make a claim
under the guarantee, as the unit (and
thus also customer service) will detect
overdue cleaning!
0 Switch the appliance on using the On/
Off switch
0 Press the
"Flush" button (Figure 2/K)
for approx. 3 seconds until the following
indicators illuminate:
Coffee",
"Clean" and
Coffee" (Figure 21).
0 Fill the water tank to the maximum
mark, empty the spent coffee con-
tainer and drip catcher, and refit them.
0 The
"Water Tank" (Figure 2/N) and
"Spent Coffee" indicators (Figure
2/O) go out.
0 Now place one original AEG cleaning
tablet in the filler opening for ground
coffee (Figure 1/B).
0 Now press the
button (Figure 2/H), the
Coffee" indicator (Figure 2/G) goes out.
The
"Clean" indicator (Figure 2/L)
flashes to show that the cleaning pro-
gram has started.
Note: The cleaning program can also
be started by pressing the
or
"2 Cups" button!
Water is now pumped through the sys-
tem at short intervals to release, with
the aid of the cleaning tablet, residues
of coffee inside the machine.
0 If during the cleaning program the
"Spent Coffee" indicator (Figure 2/O)
illuminates, empty the drip catcher and
the spent coffee container, refit them
and press the
ure 2/K). The cleaning program is then
continued.
This action may need to be repeated up
to four times.
26
(Figure 2/B).
"Empty Spent
"Ground
"Ground Coffee"
"Ground
"1 Cup"
"Flush" button (Fig-
0 The cleaning program is at an end
when the
2/J) illuminates. Flush the appliance by
pressing the
2/K).
0 Then empty the spent coffee container
and the drip catcher, and refit them.
The appliance is now ready for use
again when the
indicator (Figure 2/D) illuminates.
9. Descaling the Appliance
(Figure 22, 23)
Your appliance has a descaling pro-
gram for the regular descaling of the
appliance (duration approx. 60 min.).
If the
"Descale" indicator (Figure
2/M) illuminates, you should run the
descaling program as described below.
Descaling can also be performed before
the indicator illuminates by leaving the
appliance to cool down for 2 hours and
pressing the
1/K) for approx. 3 seconds with the
appliance switched off. You can also
continue to use your appliance and run
the descaling program later. However,
you will endanger your rights to
make a claim under the guarantee,
as the appliance (and thus also cus-
tomer service) will detect overdue
cleaning!
Important: Only use liquid (not pow-
dered!), environmentally friendly des-
caler. Only use descaler exactly as per
the manufacturer's instructions. Do not
use any acid-based descaler.
0 Switch the appliance off using the On/
Off switch
to cool down for at least 2 hours.
0 Fill the water tank with approx. 600 ml
of water, only then add the liquid
descaler (never the other way
round)!
Do not switch the appliance on!
0 With the appliance switched off, press
the
"Flush" button (Figure 2/K) for
approx. 3 seconds until the following
indicators illuminate:
Coffee",
"Flush" indicator (Figure
"Flush" button (Figure
"1 Normal Cup"
"Flush" button (Figure
(Figure 2/B) and leave it
"Empty Spent
"Descale" (Figure 22).
Advertisement
