Advertisement
Quick Links
Advertisement
Related Manuals for Make Noise 7U 4 ZONE CV BUS CASE
Summary of Contents for Make Noise 7U 4 ZONE CV BUS CASE
- Page 1 7U 4 ZONE CV BUS CASE...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 4 - LIMITED WARRANTY 5 - THE 7U CASE 6 - THE 4 ZONE POWER BUS BOARD 9 - THE POWER CONNECTOR 10 - INSTALLING MODULES 11 - THE CV BUS... - Page 3 (2) this device must accept any interference received, including interference that may cause undesired operation. Changes/Modifications not approved by the Make Noise Co. could void the user’s authority to operate the equipment.
-
Page 4: Limited Warranty
LIMITED WARRANTY Make Noise warrants this product to be free of defects in materials or construction for a period of one year from the date of purchase (proof of purchase/invoice required). Malfunction resulting from wrong power supply voltages, backwards or reversed eurorack bus board cable connection, abuse of the product, removing knobs, changing faceplates, or any other causes determined by Make Noise to be the fault of the user are not covered by this warranty, and normal service rates will apply. -
Page 5: The 7U Case
THE 7U CASE Our 208hp 7U 4 Zone CV Bus Case arrives ready to use. Just add modules, patch cables and inspiration. The powder coated metal construction offers excellent mechanical durability. The lid is removable and can be closed with the system fully patched. The sleek matte black finish was selected to match our line of Black &... -
Page 6: The 4 Zone Power Bus Board
THE 4 ZONE POWER BUS BOARD The Make Noise 4 Zone Power Bus Board is a new approach to accommodating the ever growing universe of Eurorack modules. The multi-zone solution is like having 4 independent bus boards in a convenient single bus board package. - Page 7 Greater overall power handling capabilities. 4 zones adding up to a very capable +12VDC @ 4A, -12VDC @ 2.4A and +5VDC @ 1A. Each independent Zone of the Make Noise 4 Zone Power Bus Board is nearly the equivalent power capabilities of a single unit of the original Make Noise Power Bus board. Each Zone can handle up to 1A @ +12VDC, 600mA @ -12VDC.
- Page 8 Lines designating Zone 1, Zone 2, Zone 3, and Zone 4. The lines indicate which power connectors are in which Zone. This makes it easy to understand how your modules are connected so you can make connection changes if necessary. The AC Adapter is larger and no longer uses the typical 2.1mm barrel connector.
-
Page 9: The Power Connector
THE POWER CONNECTOR The adapter plug is a 4 pin DIN type, required for power supplies above 6 amps. The 4 pins are offset, and there is a keyway on the plug. These two features ensure that the plug can only be installed in the correct orientation. -
Page 10: Installing Modules
-12V connection on the module you are connecting, contact the manufacturer of the module. (Make Noise modules include photos of proper orientation in their respective manuals.) 2. Plug the bus board connector cable into the 4 Zone Bus Board, minding the polarity so that the RED stripe on the cable is oriented to the NEGATIVE 12 Volt line on both the module and the bus board. -
Page 11: The Cv Bus
THE CV BUS The CV Bus consists of three main portions: the Voltage Math, the Multiple, and the Outputs. The Voltage Math is found at the left end of the CV Bus. Like the similar circuit on the 0-Coast, it is a small collection of universally useful modular utilities. - Page 12 (These multiples are unbuffered because this allows any jack across the bus to be used as an input, and critical CV outputs in Make Noise modules are buffered already.) The Outputs are found at the right end of the CV Bus. A high quality Stereo Line Driver converts powerful modular synthesizer signal levels to the commonly used Line Level.