Advertisement
ScanGear (Scanner Driver) Does Not Start
>
Advanced Guide
Troubleshooting
ScanGear (Scanner Driver) Does Not Start
Check 1: Make sure that the MP Drivers are installed.
Insert the Setup CD-ROM into the computer's disc drive, then select Custom Install and install MP
Drivers.
Check 2: On the File menu of the application, select Select Source and
select the machine.
Important
Do not select the model name that includes WIA in it.
Note
The operation may differ depending on the application.
Check 3: Start from a TWAIN-compliant application.
>
Problems with Scanning
> ScanGear (Scanner Driver) Does Not Start
Page 703 of 758 pages
Page top
Advertisement
