Advertisement
Changing the Machine Settings on the LCD
Stickers x16, Stickers x9, Stickers x4, Stickers x2, Free-cut stickers 1, Free-cut stickers 2, Free-
cut stickers 3, Free-cut stickers 4
Printing on paper other than sticker:
Bordered x 1, x 2, x 4, x 8
Borderless x 1, x 2, x 4, x 8
Mixed 1, 2, 3
Note
Mixed 1, Mixed 2, or Mixed 3 can be selected only when the page size is set to A4 or 8.5" x
11" (LTR).
Bluetooth settings
You can change the device name of the machine, passkey, and so on in the Bluetooth settings.
For details on how to print from a mobile phone through Bluetooth communication, see
Photographs from a Wireless Communication Device
For details on how to print from a computer through Bluetooth communication, refer to
Bluetooth Communication
Note
Bluetooth settings is displayed only when the optional Bluetooth Unit is attached.
Device name:
Specifies the name of this machine that is displayed on a Bluetooth compatible device.
For example, if you set it to XXX-2, the machine will be displayed as "Canon XXX-2" on the
Bluetooth device. The default value is XXX-1 (where "XXX" is your machine's name).
Access refusal:
Selecting ON will disable searching of this machine by a Bluetooth compatible device.
Security:
When you select Enable, the passkey set on the Passkey screen becomes effective. Setting
the passkey prevents unwanted access from other Bluetooth devices. You can choose either
of the security modes below.
Mode 2
This mode is activated on service level enforced security.
The passkey will be required when printing through the Bluetooth communication.
After setting the security mode, we recommend making a trial print through Bluetooth
communication.
If printing does not start, change the security mode and try again.
Mode 3 (recommended)
This mode is activated on link level enforced security.
The passkey will be required when a Bluetooth device communicates with the
machine.
Normally select this mode.
Passkey
Changes the passkey. The passkey is a four-digit number used to prevent unwanted access
from other Bluetooth devices.
The initial value is 0000.
After you change the passkey, you may be required to input the new passkey on a Bluetooth
device, even though it had previous access to the machine. In this case, input the new
passkey on the device.
PictBridge print settings
You can change the print settings when printing from a PictBridge compliant device.
Set the print settings to Default on the PictBridge compliant device when you want to print
according to the settings on the machine.
See
Settings on a PictBridge Compliant Device
compliant device.
Photo print setting
Select the print quality, when printing directly from a PictBridge compliant device.
.
.
to change print settings from the PictBridge
Page 641 of 758 pages
Printing
About
Advertisement
