Advertisement
Safety Precautions
cause injury.
Print Heads
Keep ink tanks out of the reach of children.
and ink tanks
In case ink is accidentally licked or swallowed, rinse out mouth or give
one or two glasses of water to drink.
If irritation or discomfort occurs, obtain medical advice immediately.
In case ink gets in contact with eyes, rinse with water
immediately.
In case ink gets in contact with skin, wash with soap and
water immediately.
If irritation to eyes or skin persists, obtain medical advice immediately.
Do not shake Print Heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
Do not throw ink tanks into fire.
Do not attempt to disassemble or modify the Print Head and
ink tanks.
Do not handle the Print Head and ink tanks roughly such as
applying them excessive pressure or dropping them.
Once you have installed the Print Head and ink tanks, do not
remove them unnecessarily.
Note when you place the machine near other electrical appliances such as fluorescent lamps
Place the machine at least 5.91 inches / 15 cm away from other electrical appliances such as
fluorescent lamps. If the machine is placed closer to those, it may not be able to work properly due
to fluorescent noises.
When you turn off the power
When you turn off the power, always press the
green) has gone out. If you disconnect the power plug from the power outlet when the Power lamp
lights or flashes, the Print Head cannot be protected and you may not be able to print later.
Never touch the electrical contacts on
a Print Head after printing.
The metal parts may be very hot and could
cause burns.
Do not rinse or wipe the Print Head
and ink tanks.
ON
button and be sure that the Power lamp (in
Page 105 of 758 pages
Page top
Advertisement
