Digital Watchdog DWC-V7553W Quick Start Manual

Quick Start Guide
DWC-V7553W
WHAT'S IN THE BOX
Template
sheet
Mount bolts
1 Set for bolt
and nuts
Mount Bolt & Nut and nut
installation
Mount Bolt & Nut Torx Wrench
Plastic Anchor-2pcs
Torque Quick Setup
1 Set
wrench Guide
Mount Bolt & Nut Torx Wrench
Screw &
Mount Bolt & Nut Torx Wrench
Plastic Anchor-2pcs
Template Sheet
Screw and
for installing by Bolt & Nut
Test video
plastic 1 Set
Template Sheet cable
anchor-2pcs
Manual
for installing by Bolt & Nut
Screw &
Template Sheet
Torx Wrench
Plastic Anchor-2pcs
Manual
for installing by Bolt & Nut
Template Sheet
NOTE: Download all your support materials and tools in one place
Manual Test Video Cable
for installing by Bolt & Nut
1. Go to: http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in
the 'Search by Product' search bar. Results for
applicable part numbers will populate automatically
based on the part number you enter.
3. Click 'Search'. All supported materials, including manuals
Manual Test Video Cable
and quick start guide (QSGs) will appear in the results.
Attention: This document is intended to serve as a quick reference for
initial set-up. It is recommended that the user read the entire instruction
manual for complete and proper installation and usage.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours:
9:00AM – 8:00PM EST, Monday thru Friday
STEP 1 – PREPARING TO MOUNT THE CAMERA
1. The mounting surface must withstand five times the weight of
your camera.
2. Do not let the cables get caught in improper places or the electric
line cover can be damaged. This may cause a short or fire.
3. Detach the camera's dome cover by loosening the 2 screws on the
dome using the included torque wrench.
4. Use the mounting template to mark and drill the necessary holes in
the mounting surface.
Protection sticker
Screw &
Mount Bolt & Nut Torx Wrench
Plastic Anchor-2pcs
1 Set
Screw &
Torx Wrench
Plastic Anchor-2pcs
Screw &
Template Sheet
Manual Test Video Cable
for installing by Bolt & Nut
Screw &
1 Set
Plastic Anchor-2pcs
Manual Test Video Cable
1 Set
Test Video Cable
Test Video Cable
digital-watchdog.com
Quick Start Guide
STEP 2 – CABLING THE CAMERA TO
EXTERNAL DEVICES
Pass the wires through the mount bracket and make all
necessary connections. Connect the BNC cable and power
cables to the camera.
Power
Power Consumption
Requirements
DC12V DC12V: 2W, 176mA