Conexo Rfid Label; Correct Use - GEM 9428000ZG05YS08C1A01015 Operating Instructions Manual

4 CONEXO RFID label

3.2 Description
The product is a motorized quarter turn actuator. The actuator
is designed for DC or AC operating voltages. A manual over-
ride and an optical position indicator are integrated as stand-
ard. The torque in the end positions is increased. This enables
a closing curve matched to the valves.
3.3 Function
The GEMÜ 9428 motorized quarter turn actuator is a compact
design. The motor and gear are combined as one unit in
aplastic housing. The quarter turn actuator is designed for
use with AC or DC operating voltages and utilises a DC motor
with a secondary spur gear. The 90° movement is achieved by
a ball screw and lever based on the scotch yoke principle. An
optical position indicator and a manual override are integrated
as standard. The end positions are adjustable by means of
microswitches. In the end positions, the motor is stopped im-
mediately by a short circuit in the rotor. The limit switches are
mounted on a switch mounting plate and are adjustable. Thus
an opening and closing limitation is possible. When adjusting
the end positions, a distance of approx. 0.5 - 1 mm must be
ensured in the switching lever of the respective end positions.
The power supply can be 12 V / 24 V DC or 12 V / 24 V AC, de-
pending on the version.
4 CONEXO RFID label
Product surface
▶ The CONEXO RFID label cannot be read out on metallic
surfaces.
CONEXO RFID label
The CONEXO RFID label can be retrofitted on existing com-
ponents and can also be fitted to products from third-party
suppliers. The CONEXO RFID label must be ordered separately
and affixed to the desired component for this purpose.
4.1 Construction
4.2 Assembly
1. Degrease the surface of the product in the area to be
covered.
2. Pull the transfer paper off the RFID label.
3. Affix the RFID label to the appropriate place on the
product.
GEMÜ 9428
NOTICE
RFID label
RFID chip
Transfer paper

5 Correct use

Danger of explosion!
▶ GRisk of death or severe injury.
●
Improper use of the product!
▶ Risk of severe injury or death.
▶ Manufacturer liability and guarantee will be void.
Only use the product in accordance with the operating
●
conditions specified in the contract documentation and in
this document.
The product is not intended for use in potentially explosive
areas.
6 / 34
DANGER
Do not use the product in potentially
explosive zones.
WARNING
www.gemu-group.com