18. Balance unit.
a. Loosen harness hook (P).
b. Put on harness and attach unit to harness.
c. Slide harness hook (P) up or down until unit balances with
cutting attachment approximately 2 - 3" from ground.
d. Tighten harness hook screw.
P
- O
RE
PERATION
OPERATION WITH BLADES
Preparing the Trimmer/Brush Cutter for Blade Use
Blade use DEMANDS specific Brush Cutter configuration. Operation without specified shield and harness can result
in serious personal injury.
Plastic and Nylon Blades Require "Blade Conversion Kit," P/N 99944200415
(Metal Shield [A] and Shoulder Harness [B]).
G
RASS
WARNING
DANGER
A
T
/B
RIMMER
RUSH
O
'
PERATOR
S
P
B
C
UTTER
21
M
ANUAL