Related Manuals for SOLIDSVAC SV800-CAROUSEL
Summary of Contents for SOLIDSVAC SV800-CAROUSEL
- Page 1 Solidsvac Pumps SV800 Operations Manual Models SV800-CAROUSEL Version 1.0 Augustt 2019 201 First Avenue - Bongaree - QLD 4507 - Australia +61 456 000 665 / sales@solidsvac.com / www.solidsvac.com...
- Page 2 CONTENTS Description Page Safety First Operational Overview Design Registration Technical Data Pump Set-up Operation Maintenance Main Components...
- Page 3 SAFETY FIRST CAUTIONS AND GENERAL SAFETY This manual contains important information concerning the installation, operation and maintenance of the SolidsVac Pump, Model SV800. To prevent injury to personnel or equipment damage, this manual should be read and understood by those responsible for the installation, operation and maintenance of the equipment.
- Page 4 Place the gasket supplied between the flange on the Rotating Arm and the Drop Box and secure with bolts, washers and nuts supplied. N.B. Assistance will be required in lifting and positioning the drop box. N.B. Ensure that the Carousel is secured to the floor either by bolts or welding. www.solidsvac.com page 4...
- Page 5 Position the Rotating Arm over the Skip/Bin and lock into position by Valve and have Air turning the Locking Handle clockwise. Supply Valve OFF 6. Maintenance before commencing any work on the unit REPORT ANY DEFECTS IMMEDIATELY telephone +61 456 000 665 email sales@solidsvac.com page 5...
- Page 6 7. Main Components www.solidsvac.com page 6...
- Page 8 Model Number Serial Number Date of Manufacture Inspected by 201 First Avenue - Bongaree - QLD 4507 - Australia +61 456 000 665 | sales@solidsvac.com www.solidsvac.com...
Need help?
Do you have a question about the SV800-CAROUSEL and is the answer not in the manual?
Questions and answers