Bosch AHS 42-16 Operating Instructions Manual page 12

F016 L69 935 - GB Seite 4 Mittwoch, 29. Oktober 2003 5:47 17
Accessories
Blade cover (4-16, 42-16).................F 016 800 165
Blade cover (48-16) ..........................F 016 800 166
Blade cover (52-16) ..........................F 016 800 167
Blade cover (63-16 C) ......................F 016 800 168
Collecto 40 (4-16, 42-16).................. 2 608 005 112
Collecto 50 (48-16, 52-16)................ 2 608 005 114
Collecto 70 (63-16 C) ....................... 2 608 005 113
Protective goggles ............................ 2 607 990 041
Gloves .............................................. 2 607 000 134
Lubricant spray ................................. 1 609 200 399
Clipping sheet...................................F 016 800 055
Fault Finding
The following table gives checks and actions that you can perform if your machine does not operate cor-
rectly. If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
Symptom
Hedgecutter fails to oper-
ate
Hedgecutter operates
intermittently
Motor runs but blades
remain stationary
Cutting blade hot
12 • F016 L69 935 • TMS • 29.10.03
Possible Cause
No power
Mains socket faulty
Extension cord damaged
Fuse faulty
Extension cord damaged
Internal wiring defective
On/Off switch(es) defective
Internal fault
Cutting blade blunt
Cutting blade has dents
Too much friction, due to lack of lubri-
cant
English - 4
Remedy
Check power
Check other socket, replace
Check cord, replace
(Contact service agent)
Replace fuse
Check cord, replace
(Contact service agent)
Contact service agent
Contact service agent
Contact service agent
Have blade sharpened
Have blade overhauled
Apply lubricant spray