No.
Part name
3
Wireless adapter 1) Follow procedures item
4
Front panel
Procedures
2) Remove screw holding the wireless adapter
3) Disconnect the connector for the wireless
adapter
Wireless adapter
Screw
Cover wireless adapter
1) Stop operation of the air conditioner and turn
off its main power supply.
2) Open two screw caps and securely remove
screws (2 pcs.) at the front panel.
3) Take off the hooks of front panel from top side
of the back body.
4) Slightly open the lower part of the front panel
then pull the upper part of the front panel
toward you to remove it as shown on figure.
1
Wireless adapter
connector
Hooks of
front panel
Front panel
Back body
- 79 -
Remarks
Air inlet grille
Screw
Screw
Screw cap
Front panel