Table of Contents
Advertisement
Setting Up Your Camera
Pre-Installation Checklist
1. Insert a fully charged camera battery.
2. Insert a properly formatted memory card.
3. Remove any attached lanyard or neck strap.
Camera Settings
•
Flash mode
Set
strobe.
•
Shutter Type
Set
•
Touch Settings
Set
Exposure Settings
Refer to the Camera Settings
section of our website for recommendations on exposure settings for a
wide variety of shooting situations:
https://www.ikelite.com/blogs/cheat-sheets
Power Save
It is recommended to set the
settings to the shortest intervals that makes sense for your shooting.
Instead of turning the camera off and on to conserve battery, the
camera will automatically sleep after the pre-set interval. To wake the
camera, simply perform an operation such as pressing the shutter
button halfway down.
10
to "Forced flash on" when using an external
to "OFF" when using an external strobe.
to "MSHTR" when using an external strobe.
Cheat Sheets
Sleep Mode
in the Photo School
Auto LVF/Monitor Off
and
Advertisement
Table of Contents
