Hitachi C12RSH2S Safety Instructions And Instruction Manual page 20

English
9. Position adjustment of laser line
WARNING:
CAUTION:
20
* Make sure before plugging the power plug into the receptacle
that the main body and the laser marker are turned off .
* Exercise utmost caution in handling a switch trigger for the
position adjustment of the laser line, as the power plug is plugged
into the receptacle during operation.
If the switch trigger is pulled inadvertently, the saw blade can
rotate and result in unexpected accidents.
* Do not remove the laser marker to be used for other purposes.
Fig. 16
Fig. 17
* Laser radiation- Do not stare into beam.
* Laser radiation on work table. Do not stare into beam.
If your eye is exposed directly to the laser beam, it can be hurt.
* Do not dismantle it.
* Do not give strong impact to the laser marker (main body of
tool); otherwise, the position of a laser line can go out of order,
resulting in the damage of the laser marker as well as a shortened
service life.
* Keep the laser marker lit only during a cutting operation.
Prolonged lighting of the laser marker can result in a shortened
service life.
* Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous
radiation exposure.
C329113