Remove Or Replace A Cru; Computer Cover - Lenovo ThinkCentre neo 70t Gen 3 User Manual

• Power cord
Optional-service CRUs
• Coin-cell battery
• Power supply assembly
* for selected models

Remove or replace a CRU

This section provides instructions on how to remove or replace a CRU.

Computer cover

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
For access, do the following:
1. Remove any media from the drives and turn off all connected devices and the computer.
2. Disconnect all power cords from electrical outlets and disconnect all cables from the computer.
3. Unlock any locking device that secures the computer cover.
4. Lay down the computer to place the computer cover facing up.
Removal steps
Note: If a locking device is available, use it to lock the computer after installing the computer cover.
30
neo 70t Gen 3 User Guide