Remove or replace a CRU
This section provides instructions on how to remove or replace a CRU.
Computer stand
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Turn off the computer and remove all connected devices and cables.
2. Disconnect the computer from ac power and all connected cables.
3. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the computer cover is facing up.
Replacement procedure
Depending on your computer stand, refer to one of the following to replace the computer stand.
• Full-function monitor stand
38
M70a Gen 2 and M90a Gen 2 User Guide