Electrode Position; Combustion Head Adjustment - Riello RS 1000/EV C01 Installation, Use And Maintenance Instructions

5.9

Electrode position

Place the electrode on the ignition pilot observing
the dimensions specified in Fig. 14.
WARNING
5.10

Combustion head adjustment

The air damper servomotor 4)(Fig. 4), beyond varying the air out-
put according to the output demand, through a leverage varies
the combustion head adjustment.
This system allows an optimum adjustment also at minimum fir-
ing rate. Similarly to servomotor rotation, it is possible to vary the
opening of the combustion head moving the tie-rod on the holes
(5-6-7-8-10)(Fig. 15).
The selection of the hole to be used is determined based on the
maximum output requested, as illustrated in Tab. J.
In the factory, the adjustment is adjusted for the maximum stroke
(hole 10, Fig. 15).
Leverage hole
5
5
6
8
5
6
8
10
Installation
Output (kW)
From A
1100 4000
4000 6600
6600 8100
8100 10100
1500 5500
5500 7500
7500 9650
9650 11100
Tab. J
0
18.5
- 2
Diffuser
20061124
19 GB
71.5
± 1
Electrode
D9218
Fig. 14
Fig. 15
20062132