Golden Technologies BUZZ AROUND LT GB108 Owner's Manual page 29

Install the Seat
7. Hold the seat on an angle so you can see the seat swivel post underneath.
8. Place the seat swivel post into the seat post as shown in figure 24.
9. Push down on the seat to lock the seat in place. Move the seat from side to side to
make sure it is locked in place.
WARNING! Pinch Point! Keep hands and clothing clear of the seat swivel post
and seat post.
properly engaged by turning the seat slightly left and right.
Unlock the Tiller
10. Turn the tiller lock knob counterclockwise 90 degrees to the unlocked position.
See figure 23 on page 28.
WILL NOT TURN! THIS COULD CAUSE INJURY.
Accident hazard due to incorrect seat position! Always turn the seat to face forwards
and engage it before driving. If the seat is in any other position, the possibility of tipping
is increased. Before turning the seat, always ensure that the scooter is on an even and
solid surface.
VIII. ASSEMBLY
Seat Post
Figure 24. Installing the Seat
Accident hazard due to non-engaged seat! Ensure that the seat is
IF YOU DON'T UNLOCK YOUR TILLER LOCK KNOB, YOUR TILLER
Seat
Swivel
Post
29