Golden Technologies BUZZ AROUND LT GB108 Owner's Manual page 25

Fold Down and Lock the Tiller
6. Push in and turn the tiller lock clockwise 90 degrees. See #1 on figure 17.
This will lock the front wheel to keep it from turning side to side to help control while
carrying.
6. Loosen tiller adjustment knob and fold the tiller down flat. See #2 on Figure 17. Then
tighten the adjustment knob to secure the tiller in its new position.
Separate the Drivetrain from the Frame
WARNING! Be careful not to pinch your fingers between the frames. This area is
a pinch-point and requires your full attention.
7. Pull up on the drivetrain release lever with one hand to unlock the front and rear
frame sections. See Figure 18.
8. Pull the front frame up and off of the drivetrain. See figure 18.
VII. DISASSEMBLY
Figure 17. Lowered Tiller
Figure 18. Separating the Drivetrain and Frame
2
25
1