Golden Technologies BUZZ AROUND LT GB108 Owner's Manual page 18

Seat Rotation Lever
The seat can be rotated through 360° and locked at any 45° position.
1. Pull up on the seat rotation lever and rotate the seat to the desired position.
See figure 8.
2. Release the handle to lock the seat at any 45° position.
Figure 9
Seat Height Adjustment
To adjust the seat height:
1. Fold the seat back down, grasp the seat on both sides and lift the seat up and off of
the seat pedestal. See Figure 9. (Note: Seat arms can be removed to reduce the seat
weight).
2. Remove the battery box by lifting it up. See figure 10.
3. Loosen and remove the nut and bolt.
4. Position the seat post at the desired height while aligning the holes in the seat post
and the seat pedestal.
5. Install and tighten the nut and bolt.
6. Reinstall the battery box.
7. Place the seat back onto the seat post and push down to lock it into place. Move the
seat from side to side to make sure it is locked into place.
V. OPERATION
Figure 8: Seat Rotation Adjustment
Nut and Bolt
Figure 10
18