Mitel 6940 Phone Getting started Activating your phone Softkeys Follow the Installation Guide for the Mitel 6940 IP Phone to connect the phone to your network. Contacts Programmable Keys Six state-sensitive Displays a list of your Up to 96 programmable After the phone boots, press the ACTIVATE soft key.
Page 3
Mitel 6940w A new variant of the 6940 IP Phone is available called the 6940w IP Phone. The 6940w IP Phone is physically identical to the 6940 IP Phone. The new features supported by the 6940w IP Phone relative to the 6940 IP Phone are embedded WiFi, Bluetooth 5.0, IEEE 802.3az standard (Energy Efficient Ethernet) capability.
Page 4
Connecting to WPA2 Enterprise network Navigate to Settings > WiFi. The Available Networks settings menu is displayed after approximately 30 seconds.
Page 5
Select the name of the enterprise WiFi network; for example, Mitel from Available Networks. Note: You can connect to only one SSID. If multiple SSIDs are listed, their relative signal strength is displayed. The phone does not retain memory of previously discovered networks.
To disconnect from WiFi (Mitel) and use the LAN port again, under Saved Network press the Disconnect softkey. Click Close softkey to return to the Settings menu. Connecting to a home network Navigate to Settings > WiFi. The Available Networks settings menu is displayed after approximately 30 seconds.
Page 7
The Save and Connect? dialog box appears. Click Yes to connect. The connected network (Home Network) is listed under Saved Network. To disconnect from WiFi (Home Network) and use the LAN port again, under Saved Network press the Disconnect softkey. Click Close softkey to return to the Settings menu.