Mitel 6920 Phone Getting started Activating your phone Softkeys Follow the Installation Guide for the Mitel 6920 IP Phone to connect the phone to your network. Contacts Programmable Keys Four state-sensitive Displays a list of your Up to 18 programmable After the phone boots, press the ACTIVATE soft key.
Page 3
Mitel 6920w A new variant of the 6920 IP Phone is available called the 6920w IP Phone. The 6920w IP Phone is physically identical to the 6920 IP Phone. The new features supported by the 6920w IP Phone relative to the 6920 IP Phone are embedded WiFi, Bluetooth 5.0, IEEE 802.3az standard (Energy Efficient Ethernet) capability.
Page 4
Connecting to WPA2 Enterprise network Navigate to Settings > WiFi. The Available Networks settings menu is displayed after approximately 30 seconds.
Page 5
Select the name of the enterprise WiFi network; for example, Mitel from Available Networks. Note: You can connect to only one SSID. If multiple SSIDs are listed, their relative signal strength is displayed. The phone does not retain memory of previously discovered networks.
To disconnect from WiFi (Mitel) and use the LAN port again, under Saved Network press the Disconnect softkey. Click Close softkey to return to the Settings menu. Connecting to a home network Navigate to Settings > WiFi. The Available Networks settings menu is displayed after approximately 30 seconds.
Page 7
The Save and Connect? dialog box appears. Click Yes to connect. The connected network (Home Network) is listed under Saved Network. To disconnect from WiFi (Home Network) and use the LAN port again, under Saved Network press the Disconnect softkey. Click Close softkey to return to the Settings menu.
Need help?
Do you have a question about the OfficeSuite UC 6920 and is the answer not in the manual?
Questions and answers