Advertisement
OPERATION
This juicer squeezes the fruit instead of grinding which allows the juice to maintain its pure
colour, natural taste, nutrients and vitamins. The juice will flow in your juice container from
the juice spout and the pulp will be ejected from pulp ejection spout and be collected by
pulp container. When using the juicer, the pulp container and juice container must be
assembled in position.
Power Switch
the power switch has three settings:
• "I" indicates "ON", press the power switch to "I" position to activate the motor and start
making juice.
• "O" indicates "OFF" position, press the power switch to "O" position to turn off the
juicer.
• "R" means reverse rotation, which is only used when something is stuck and you need
to unclog.
Using the Juicer
1.
Before connecting the power cord into the electrical outlet, ensure the power
switch is in the "O" position.
2.
Ensure the juice container and the pulp container are placed in position.
3.
Cut fruits and vegetables into smaller pieces (15x15x15mm) before placing them
into the juicer.
4.
Place the ingredients into the hopper and use the pusher to feed them into the
grinding head.
5.
Connect the appliance to the power source and then press the power switch to
the "I" position, the appliance starts to work. After few minutes, the juice flow out.
Notes:
• Do not turn the power switch from "I" to "R" or from "R" to "I" directly at any time
during operation. Always allow the appliance stop running completely and then
turn the power switch from "I" to "R" or from "R" to "I".
• Do not operate the unit before placing food into the hopper, to avoid damaging
the grinding assembly (include grinding head and strainer).
• Do not put your fingers or other foreign objects into the feeding opening during
operation.
Advertisement
