Advertisement
Notes:
• Remove any hard seeds before juicing.
• It is not recommended to process coconuts or similar hard ingredients, since this
may damage the motor.
• It is not recommended to process hard fruits or vegetables rich in fibre and
starch, such as sugarcane.
• The peel and pips should be removed from oranges, lemons, grapefruits and
melons.
6.
When the juice container is full (the max capacity is 400ml) or the food has
finished extracting, turn the power switch to the "O" position and empty the juice
container and residue container before continuing extracting.
7.
During operation, if the machine gets stuck, place the power switch to "O" position
and then press the reset button located on the bottom of the appliance
8.
Press and hold the power switch in the "R" position for few seconds then try
resuming operating.
9.
If the reverse function doesn't work, remove the ingredients and disassemble the
juicer to clear any large pieces of food.
10. Reassemble the juicer and resume operation.
Notes:
• Do not use the juicer for more than 15 minutes at a time. Ensure a minimum 30 minutes
of rest between operating cycles.
• Do not overfill the juicer. Once the juice container is full, you must stop the appliance
and empty the pulp container before next cycle.
• During operation, if the interlock switch between the hopper and the motor unit is
disconnected, the motor will stop to prevent from danger.
Reset button
Advertisement
