Table of Contents
Advertisement
OPERATION
Before using the juicer for the first time, clean all parts that will come into contact with food
thoroughly (Refer to the "Cleaning and Care" section of this guide).
Control dial operations
The control dial allows for four different actions depending on which one is activated.
Activating any one of them can be done by turning the switch to align its indicator to the
desired action.
•
Rev - Used to unblock pulp build-up and when the motor is locked
•
O – Stop
•
Soft- Lower power mode (suitable for juicing softer fruits and vegetables)
•
Hard - Higher power mode (suitable for juicing harder fruits and vegetables)
Step 1:
Wash your chosen fruits and vegetables.
Cut them into a size that will fit the feeding
hole of the juicier.
Place them on the tray above the feed in
preparation for juicing.
Do not process any fruits and vegetables
with cores. hard seeds, thick skins, or shells
until the they have been removed.
Step 2:
Plug in the power cord (1) and switch the
power on.
Ensure the control dial is in the "O" position
before the power is turned on. The
appliance will immediately start running as
soon as the power is turned on otherwise.
Advertisement
Table of Contents
