Table of Contents
Advertisement
3.1 Safety notes
DAV Tech automation products must be handled, installed, and maintained only by competent personnel
trained in the installation of automation components, and only for the purposes described in the user manual.
The technician must pay particular attention to potential risks caused by mechanical and electrical hazards.
It is very important that applications and installations meet all applicable safety requirements.
Each technician is obliged to take responsibility for verifying his / her knowledge and understanding of all applicable
safety standards.
Any use that does not comply with the safety requirements can damage the equipment and injure the user.
DAV Tech Srl will not be held responsible and will not assume any responsibility for damages caused by products
handled and / or installed improperly, or in cases where the customer has allowed, or performed, modifications
and / or repairs not authorized by DAV Tech Srl.
General precautions
• The illustrations in this manual are typical examples and may differ from the product received.
• This manual is subject to change due to product improvements, specification changes or improvements to the manual.
• DAV Tech srl is not responsible for damage to things and / or people caused by incorrect installations and / or unauthorized
modifications of the product.
European directives
NORMATIVA
89/336/EEC
EN 55011
93/68/EC
98/37/EC
EN 60204-1
2002/95/CE
NOTE. Since the drives are of an integrated type, they need a new confirmation after installation in the final product.
DESCRIZIONE
EMC Directive
Limits and methods of measurement of ratio disturbance
characteristics of industrial, scientific and medical (ISM)
radio-frequency equipment
CE Marketing - Low voltage
Machinery
Safety of machinery - Electrical equipment of machines
RoHs Directive
PCP VOLUMETRIC PUMP DRIVE
3-may1989
15-Sep-1998
22-Jul-1993
22-Jun-1998
30-Jun-2006
27-Jan-2003
DATA
. 9
pag
Advertisement
Table of Contents
