Table of Contents
Advertisement
4.2 Thermal dissipation
The trend of the thermal dissipation in relation to the supplied current is shown below.
Watts
30
25
20
15
10
5
1,0
The electric current required to control the PCP pumps is 2.5 A.
4.3 Electrical connections
Below is the trend of the thermal dissipation in relation to the supplied current.
• Avoid short-circuits, incorrect mass conductor connection, and polarity inversions.
• Check the voltage levels before plugging in the power connector.
• Always connect the ground terminal.
2,0
3,0
ATTENTION
PCP VOLUMETRIC PUMP DRIVE
4,0
5,0
6,0
7,0
Amperes
. 13
pag
Advertisement
Table of Contents
