Table of Contents
Advertisement
Memory Course
Up to 3 memory courses can be saved.
Refer to "Saving a Auto Course with My Own Favorite Settings" (Page EN29) and "Creating Your Own Course" (Page
EN31) to see how to save a memory course.
Saving a Auto Course with My Own Favorite Settings
Memory settings that can be saved (Pages EN34 – EN37)
Caution
The setting will not be saved if you turn OFF
the power switch of the main unit or pull out
the power cord during a massage.
To save during a auto course
Press the MEMORY buttons for 2 seconds during an operation to
save a favorite setting.
The saved MEMORY button will light up then.
To save at the end of a auto course
①
At the end of the auto course, favorite settings (Pages EN34 –
is
MEMORY button
EN37)
displayed and the
●
Saving is also possible when you press
massage mid-way through a course.
●
Saving is also possible during a stowing action.
②
Select and press the button of the course in which you want to
save your favorite setting for 2 seconds while the buttons are
(flashing lasts for about 25 seconds)
flashing
●
Selected button will light. (Example:
●
If another setting has already been saved, the message "Another
course has been saved" appears and the button starts to flash
rapidly.
ㅡ To update the contents of a new setting, press the same
button again.
Press
ㅡ If you do not want to delete the setting already saved, press
other MEMORY button.
③
At the end of the stowage operation, the power will be turned
off approx. after 5 seconds.
▶
flashes.
to end the
.
)
Press
Continued on the next page
EN29
Advertisement
Chapters
Table of Contents
