Table of Contents
Advertisement
Memory Course
EN30
(Continued)
To start the saved program
1
Press
( When the unit has not been operated for more than 3 minutes, the
display automatically disappears.)
●
The saved MEMORY button will flash.
2
Select one of the MEMORY buttons with a saved
course.
●
Saved MEMORY button will light. (Example:
After body scanning, massage with saved settings will start.
To delete the saved settings
1
Press
2
While pressing and holding the
MEMORY button that you want to delete for
about 2 seconds.
●
The MEMORY button will start to flash rapidly.
3
Press the same MEMORY button one more time
while the MEMORY button is flashing (flashing
lasts for about 12 seconds).
The contents in the memory course will be deleted.
●
to turn on the power.
to turn on the power.
will flash rapidly and then go off.
)
, press the
Advertisement
Chapters
Table of Contents
