Table of Contents
Advertisement
Personalized memory
User may log in three personalized memory programs at most.
User may save through "Save an automatic program made a favorite through adjustment" (EN29)
or "Programming by user" (EN31).
Save an automatic program made a favorite through adjustment
A favorite content for login may come into being through adjustment (EN34 to EN37).
Attention
If the power switch or power cable
on back of the main unit is turned off
or unplugged during massage, the
content the user has logged into will
not be saved.
00_SHW150617_MA81.indb
29
For saving data during an automatic program
To log in the newly set favorite content, press the Personalized
Memory Program button for two seconds during massage.
The Personalized Memory Program button for data saving will
then be lit.
For saving data after an automatic program
①
After an automatic program has completed, the
Personalized Memory Program button for favorite content
adjustment (EN34 to EN37) will begin to flicker.
●
If
is pressed in a program, data saving can be
realized after massage too.
●
Data saving can be realized during storage too.
②
Press the button for login for two seconds when the
Personalized Memory Program button is flickering (about
less than twenty-five seconds).
●
The button selected (such as
●
If another setup has been memorized, "Bleep" will be
announced and the button will begin to flicker quickly.
ㅡ To update the previous setup to the newly set content,
press the same button again.
Press
ㅡ If the memorized setup is not expected to be deleted,
press another button.
③
The main unit will be powered off automatically about five
seconds after storage.
) will be lit.
Press
2015-12-30
EN29
11:20:06
Advertisement
Chapters
Table of Contents
