Table of Contents
Advertisement
Creating Your Own Course
You can create your own course by saving manual action and stretch action in sequence in one of the memory courses.
Air action can also be saved simultaneously together with manual action.
Favorite settings that can be saved (Pages EN34 – EN37)
You can freely combine
a manual action with a
stretch action!!
How to save a manual action
1
Select and activate manual action.
●
Adjust the setting to suit your preference.
2
Select the MEMORY button you want to save and
press it for about 2 seconds.
The action currently in operation and the settings will be saved.
●
The
will flash, the
button will light up.
●
The saved sequence will be displayed in
3
Select and activate the manual action that you want
to save next.
The saved action will be interrupted and the selected action will start.
●
The flashing of
●
Adjust the setting to suit your preference.
4
Press the same MEMORY button for about 2
seconds.
The action currently in operation and the settings will be saved.
●
The saved sequence will be displayed in
●
The newly saved action will be inserted after the interrupted action.
●
The saved actions will start in sequence at intervals of about 1 minute.
(The FULL BACK ROLL time is different).
5
3
Repeat steps
●
Maximum 16 types can be saved.
will light up and the selected
will change and the button will flash.
4
–
.
▶
Continued on the next page
.
.
EN31
Advertisement
Chapters
Table of Contents
